The Tramex Moisture Encounter MEX5 is a professional building moisture meter that combines dual-depth non-destructive scanning with environmental and surface-temperature measurements. It is designed for inspectors, restoration professionals and flooring specialists who need to evaluate both material moisture and the conditions surrounding it.<\/p>\n
The meter can measure wood moisture content non-destructively, provide dedicated drywall readings and compare moisture across building materials such as plaster, tile, masonry and roofing. Built-in humidity and infrared temperature functions add context that is normally missing from a basic pinless moisture detector.<\/p>\n
The MEX5 offers shallow and deep measurement modes. The shallow signal reaches approximately 9 mm, or 3\/8 inch, while the deep signal penetrates up to approximately 30 mm, or 1 1\/4 inches.<\/p>\n
This is particularly useful on layered surfaces and floor coverings. Comparing shallow and deep readings can help determine whether elevated moisture is concentrated near the surface or whether the substrate below is influencing the reading.<\/p>\n
The MEX5 provides non-destructive wood moisture-content measurements from 0% to 30%. Specific gravity can be adjusted for wood species, helping the meter better match the material being tested.<\/p>\n
It also includes drywall measurement and a 0\u2013100 comparative scale for other building materials. These modes make the meter useful for building surveys where the user may move from wood flooring to drywall, plaster, masonry or roofing materials during the same inspection.<\/p>\n
A built-in hygrometer displays ambient relative humidity, air temperature, dew point and humidity ratio. The meter also includes an infrared surface thermometer with emissivity adjustment.<\/p>\n
Together, these measurements can help identify situations where environmental conditions are contributing to a moisture problem. For restoration work, they also provide useful context when tracking the drying process.<\/p>\n
The dual-depth system is particularly relevant when evaluating installed floors or plywood subfloors. A shallow reading can focus more closely on the material near the surface, while the deeper mode can reveal influence from the substrate underneath.<\/p>\n
This makes the MEX5 useful when investigating elevated moisture through floor coverings without immediately removing them. As with other comparative moisture measurements, trends across multiple locations are generally more useful than a single isolated reading.<\/p>\n
The MEX5 connects to the Tramex Meters app, where readings can be visualized as moisture maps, reports and charts. Measurements can be geotagged and time-stamped, and photos can be attached to inspection records.<\/p>\n
For restoration and building surveys, this documentation can make it easier to communicate where moisture was found and to compare conditions during follow-up visits.<\/p>\n
The meter includes ports for optional accessories. Pin probes can extend the MEX5 to direct wood, drywall and WME measurements, while optional relative-humidity probes can be used for cavities, building-envelope work and in-situ concrete RH testing.<\/p>\n
These accessories are not part of the basic pinless measurement system, but they allow the MEX5 to grow into a broader professional inspection platform.<\/p>\n
The MEX5 is best suited to professionals who need more information than a simple moisture percentage. Its dual-depth scanning, environmental sensing, infrared temperature and reporting tools make it particularly strong for building inspection, restoration and complex flooring investigations.<\/p>\n
For occasional household checks it is likely excessive. For users who regularly need to compare surface and deeper moisture while documenting environmental conditions, the MEX5 provides a much more complete workflow.<\/p>\n","protected":false},"excerpt":{"rendered":"
The Tramex MEX5 is a professional dual-depth non-destructive moisture and humidity meter for wood, drywall and building materials. It combines 9 mm shallow and 30 mm deep scanning, built-in relative humidity and infrared surface temperature, and Bluetooth reporting through the Tramex Meters app.<\/p>\n","protected":false},"featured_media":971,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[123],"product_cat":[68],"product_tag":[],"class_list":["post-915","product","type-product","status-publish","has-post-thumbnail","product_brand-tramex","product_cat-moisture-meters","first","instock","product-type-external"],"_links":{"self":[{"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/product\/915","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/comments?post=915"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/media\/971"}],"wp:attachment":[{"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/media?parent=915"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/product_brand?post=915"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/product_cat?post=915"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.podovi.org\/en\/wp-json\/wp\/v2\/product_tag?post=915"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}